Catamaran Kolibri Sea Cat KM-300CM

Maximum efficiency and comfort

Thanks to the specific hull design, the catamaran Kolibri KM-300CM seems to float above the water surface at speed, which reduces drag and saves fuel. The spacious cockpit provides comfortable accommodation for crew and cargo, and the design features reduce vibration, ensuring safe and comfortable passage through the water, even in shallow areas. Movable seats and the ability to adjust them to the optimal position guarantee maximum comfort while sailing. Thanks to quick assembly and disassembly, you can quickly prepare for water adventures and quickly put the boat away after use.

Schematic layout of compartments

The Kolibri inflatable catamaran has four sealed compartments in cylinders and an Air-deck, which guarantees reliability and safety while sailing. The working pressure in the cylinders is 0.25 bar, creating optimal conditions for comfortable navigation. In addition, the boat is equipped with bypass valves to relieve excess pressure in the cylinders. The lines of the cylinders are additionally protected by a protective beam 120 mm wide.

Reliability and durability

Kolibri Sea Cat KM-300CM is highly durable due to the use of five-layer PVC fabric with a density of 1100 g/m². This provides reliable protection against cuts and damage during use. All connections are welded using microwave installations, which guarantees their strength and reliability. The transom is made of high-quality, moisture-resistant, laminated plywood. Monolithic transom mounting supports are significantly stronger and more reliable than traditional mounting methods using PVC tape.

Catamaran fittings

1. Handrail holder (end)
2. Rotary oarlock without nut
3. Oar coupling (left, right)
4. Tug with plastic ring
5. Air valve "bravo"
6. Bypass valve
7. Oar holder
8. Transom mounting support
9. Metal transom pad

What is in the box?

1. Boat
2. Oars
3. Seat (bank) - 1 piece
4. Pump
5. Payol Air-deck
6. High pressure pump for Air-deck
7. Repair kit (spare parts)
8. Documentation
9. Boat bags and payola

The inflatable catamaran boat Kolibri Sea Cat KM-300CM is a motor boat with a stationary transom. The boat's unique open bow design makes it easy for passengers to board and load from shore, allowing for easy and comfortable entry and exit from the water. This catamaran is suitable for a wide range of activities - from relaxing family outings to intense fishing. Its use is effective both in small bodies of water and on the open sea.

Maximum efficiency and comfort

Thanks to the specific hull design, the catamaran Kolibri KM-300CM seems to float above the water surface at speed, which reduces drag and saves fuel. The spacious cockpit provides comfortable accommodation for crew and cargo, and the design features reduce vibration, ensuring safe and comfortable passage through the water, even in shallow areas. Movable seats and the ability to adjust them to the optimal position guarantee maximum comfort while sailing. Thanks to quick assembly and disassembly, you can quickly prepare for water adventures and quickly put the boat away after use.

Schematic layout of compartments

The Kolibri inflatable catamaran has four sealed compartments in cylinders and an Air-deck, which guarantees reliability and safety while sailing. The working pressure in the cylinders is 0.25 bar, creating optimal conditions for comfortable navigation. In addition, the boat is equipped with bypass valves to relieve excess pressure in the cylinders. The lines of the cylinders are additionally protected by a protective beam 120 mm wide.

Kolibri Sea Cat KM-300CM is highly durable due to the use of five-layer PVC fabric with a density of 1100 g/m². This provides reliable protection against cuts and damage during use. All connections are welded using microwave installations, which guarantees their strength and reliability. The transom is made of high-quality, moisture-resistant, laminated plywood. Monolithic transom mounting supports are significantly stronger and more reliable than traditional mounting methods using PVC tape.

Catamaran fittings

1. Handrail holder (end)
2. Rotary oarlock without nut
3. Oar coupling (left, right)
4. Tug with plastic ring
5. Air valve "bravo"
6. Bypass valve
7. Oar holder
8. Transom mounting support
9. Metal transom pad

What is in the box?

1. Boat
2. Oars
3. Seat (bank) - 1 piece
4. Pump
5. Payol Air-deck
6. High pressure pump for Air-deck
7. Repair kit (spare parts)
8. Documentation
9. Boat bags and payola